Clutch Bell, Malossi Maxi Wing for 125cc - 300cc Honda Scooters

135mm Malossi Maxi Wing Clutch Bell for 125cc - 300cc Honda Scooters


SPECIFICATIONS:

• Bell housing made of ductile steel and deep drawn;
• Spline hub made of special steel, machined, welded and broached;
• Frictional working surface machined to tight tolerances;
• Dynamically balanced;
• Nitride surface hardened.
• Inner Diameter: 135mm
• Splines: 19

COMPATIBILITY:

• HONDA FORZA 125 ie 4T LC euro 3 <-2016 (JF60E)
• HONDA FORZA 125 ie 4T LC euro 4 2017->2020 (JF69E)
• HONDA FORZA 125 ie 4T LC euro 5 2021-> (JK02E)
• HONDA FORESIGHT 250 4T LC
• HONDA FORZA X 250 4T LC <-2007 (MF 08 E)
• HONDA FORZA X 250 4T LC 2008-> (MF 10 E)
• HONDA FORZA 300 ie 4T LC euro 4 2018->2020 (NF07E)
• HONDA FORZA 300 ie 4T LC euro 3 <-2017 (NF04E)
• HONDA FORZA 250 4T LC 2001->
• HONDA JAZZ 250 4T LC 2001->
• HONDA PANTHEON 125 2T LC
• HONDA PANTHEON 150 2T LC
• HONDA REFLEX 250 4T LC 2001->
• HONDA SH I 300 ie 4T LC euro 3 2011->2014 (NF02E)
• HONDA SH I 300 ie 4T LC euro 4 2018->
• HONDA SH I 300 ie 4T LC euro 4 2015->2017 (NF05E)
• HONDA SH I 300 ie 4T LC euro 2 <-2010 (NF02E)
• PEUGEOT SV 250 4T LC
• PIAGGIO X9 250 4T LC (HONDA)
• WT MOTORS MIAMI 250 4T LC (172MM)

The clutch bells with reinforced cooling ring consist of a finned annular reinforcement producing excellent heat dissipation caused primarily from stand still starts and quick accelerations from low speeds.


This technological innovation resulted from extensive testing within the Scooter racing circuit.


The clutch bell design is based on the following principals:
greater heat transfer surface area (finned section) lowers the working temperature of the clutch bell which dramatically increases the systems durability.


The clutch system is enormously stressed in city street riding, starts uphill and tight turn exits with a passenger.


That is why Malossi has fine tuned the Maxi Wing Clutch Bell to protect your clutch.


We must not discard the fact that the finned reinforcement ring is also a safeguard against failure. It has been designed to resist the elevated centrifugal forces due to large rotational speeds generated by high performance engines. Keep in mind that centrifugal force increases by the square of the rotational speed.


**MADE IN ITALY**


**NOTE: Electrical, High Performance, Aftermarket items are non-returnable so please check photos and specifications before ordering.


Please see our Warranty and Returns Policy