Clutch Shoe, Dr. Pulley HiT for 250cc Honda, Suzuki Scooters

Dr. Pulley HiT Clutch for 250cc Honda and Suzuki Scooters


SPECIFICATIONS:

• Does Not Include Clutch Bell
• 50 Degree Pillow Springs
• Includes 1 Nut Locker
• Includes Assortment of Pillow Springs and Clutch Springs for fine tuning
• Clutch Outer Diameter: 132mm - for use with 135mm clutch bell.
• Center Opening: Width - 30mm; Height - 26mm

COMPATIBILITY:

• HONDA FORESIGHT 250 4T LC
• HONDA FORZA X 250 4T LC <-2007 (MF 08 E)
• HONDA FORZA X 250 4T LC 2008-> (MF 10 E)
• HONDA FORZA 300 ie 4T LC euro 4 2018->2020 (NF07E)
• HONDA FORZA 300 ie 4T LC euro 3 <-2017 (NF04E)
• HONDA FORZA 250 4T LC 2001->
• HONDA JAZZ 250 4T LC 2001->
• HONDA REFLEX 250 4T LC 2001->
• HONDA SH I 300 ie 4T LC euro 3 2011->2014 (NF02E)
• HONDA SH I 300 ie 4T LC euro 4 2018->
• HONDA SH I 300 ie 4T LC euro 4 2015->2017 (NF05E)
• HONDA SH I 300 ie 4T LC euro 2 <-2010 (NF02E)
• PEUGEOT SV 250 4T LC
• PIAGGIO X9 250 4T LC (HONDA)
• SUZUKI BURGMAN 250

Dr. Pulley HiT Clutch 241801 for Scooters with 250cc Honda or Suzuki engines.


This performance Dr. Pulley HiT clutch is specifically made for CN Moto 250cc WITH OUT HI/LOW transmission engine. Therefore, this clutch only works for the GT 250 or Standard 250 or any other 250s on the market that are Forward/Neutral/Reverse OR Forward/Reverse. The DR. PULLEY clutch does NOT come with the outer clutch drum.


The Dr Pulley HiT clutch has high-quality Kevlar clutch pad material running the length of the clutch arms for maximum surface area engagement with the clutch bell.


Additionally, the HiT clutch has a secondary mechanism that engages when your CVT system reaches a certain RPM (tunable with the included three sets of "pillow" springs). This secondary mechanism locks the clutch arms in place against the clutch bell preventing clutch slippage when under load!


The result? Solid clutch engagement at all times, particularly when accelerating and climbing. This clutch is designed to be tuned to your vehicle and comes with a total of six sets of springs - three clutch arm spring sets, and three pillow spring sets.


**MADE IN TAIWAN**


**NOTE: Electrical, High Performance, Aftermarket items are non-returnable so please check photos and specifications before ordering.


Please see our Warranty and Returns Policy