Clutch Shoe, Naraku Racing 107mm for 50cc 2-Stroke A/C or L/C Based Scooters

Naraku Racing Shoe Clutch for 50cc 2-Stroke A/C or L/C Franco Morini & Minarelli Based Scooters


SPECIFICATIONS:

• Outer Diameter: 107mm
• Kevlar Reinforced Clutch Shoes
• Engages 1500-2000 RPM Higher Than a Stock Clutch

COMPATIBILITY:

• Aprilia - Habana 50 2T
• Atala - Byte AT 10 50 2T, Hacker 50 2T
• Cagiva - Progress 50 2T
• CPI - Aragon GP 50 2T, Oliver 50 2T >'03, Hussar 50 2T >'03, Popcorn 50 2T >'03
• Diamo - Velocity 50 2T
• Derbi - Aceno 50 2T, Atlantis 50 2T, Hunter 50 2T, Paddock ST 50 2T, Predator 50 2T, Vamos 50 2T
• E-ton - Beamer 50 2T, Matrix 50 2T
• Explorer - Cracker 50 2T
• Flyscooter - Hero 50 2T
• HSC - ZZ Sepia 50 2T
• Hyosung - Prima 50 2T, SB50 Super Cab
• Italjet - Cruise 50 2T, Torpedo 50 2T, Formula 50 2T, Velocifero 50 2T
• Keeway - F-ACT 50 2T, Matrix 50 2T, Hurricane (Euro) 50 2T, Flash 50 2T, Focus 50 2T, Hacker 50 2T, Goccia 50 2T, Arn 50 2T
• Malaguti - Crosser CR1 50 2T, F12 Phantom R 2007
• Qlink - Hawk 50 2T, Rave 50 2T, Star 50 2T
• Suzuki - Address 50 2T, AJ-ZZ Sepia 50 2T, AP 50 2T, Katana 50 2T, Magic 50 2T, Zillion 50 2T
• TGB - R50X 50 2T, Laser R5i
• TNG - LS 50 2T, SS 50 2T
• UM - X-Speed 50 2T
• Vento - Triton 50 2T, Zip 50 2T
• Other Similar Models

This Naraku racing shoe clutch will work on most 50cc 2-stroke air-cooled or liquid-cooled Franco Morini or Minarelli based engine scooters.


**Please make sure your scooter uses the 16-spline clutch bell (drum). Also, you will need to upgrade your clutch bell (drum) from 105mm to 107mm to complete the installation.


**MADE IN TAIWAN**


**NOTE: Electrical, High Performance, Aftermarket items are non-returnable so please check photos and specifications before ordering.


Please see our Warranty and Returns Policy