Starter Motor, OKO for 50cc 4-Stroke 139QMB Scooters

OKO Performance Starter Motor for 50cc 4-Stroke 139QMB Scooters


SPECIFICATIONS:

• Bolt Hole Spacing: 70mm
• Splined Shaft Length: 12mm
• Splined Shaft Diameter: 7.5mm
• Diameter (near o-ring): 21mm
• Number of Splines: 10

COMPATIBILITY:

• Amigo - 50cc 4-Stroke Scooters
• Apollo - 50cc 4-Stroke Scooters
• Baotian - 50cc 4-Stroke Scooters
• Baron - 50cc 4-Stroke Scooters
• Bintelli - 50cc 4-Stroke Scooters
• BMS - 50cc 4-Stroke Scooters
• Coolster - 50cc 4-Stroke Scooters
• CSC - 50cc 4-Stroke Scooters
• Diamo - 50cc 4-Stroke Scooters
• Flyscooter - 50cc 4-Stroke Scooters
• Ice Bear - 50cc 4-Stroke Scooters
• Italica - 50cc 4-Stroke Scooters
• JCL - 50cc 4-Stroke Scooters
• Jonway - 50cc 4-Stroke Scooters
• Kandi - 50cc 4-Stroke Scooters
• Kinroad - 50cc 4-Stroke Scooters
• KMD - 50cc 4-Stroke Scooters
• Lance - 50cc 4-Stroke Scooters
• Leike - 50cc 4-Stroke Scooters
• Linhai - 50cc 4-Stroke Scooters
• Longbo - 50cc 4-Stroke Scooters
• Motobravo - 50cc 4-Stroke Scooters
• Motofino - 50cc 4-Stroke Scooters
• Motorino - 50cc 4-Stroke Scooters
• NST - 50cc 4-Stroke Scooters
• Peace - 50cc 4-Stroke Scooters
• Puma Cycles - 50cc 4-Stroke Scooters
• Redstreak - 50cc 4-Stroke Scooters
• Roketa - 50cc 4-Stroke Scooters
• Scootstar - 50cc 4-Stroke Scooters
• Schwinn - 50cc 4-Stroke Scooters
• SSR - 50cc 4-Stroke Scooters
• SUNL - 50cc 4-Stroke Scooters
• Supermach - 50cc 4-Stroke Scooters
• Tank Sports - 50cc 4-Stroke Scooters
• TaoTao - 50cc 4-Stroke Scooters
• Trailmaster - 50cc 4-Stroke Scooters
• Veloz - 50cc 4-Stroke Scooters
• Verucci - 50cc 4-Stroke Scooters
• Vitacci - 50cc 4-Stroke Scooters
• Viva - 50cc 4-Stroke Scooters
• Wolf - 50cc 4-Stroke Scooters
• Xingyue - 50cc 4-Stroke Scooters
• ZNEN - 50cc 4-Stroke Scooters

OKO High Torque Starter motor for 50cc to 80cc QMB139 4-stroke engines.


This Starter Motor is recommended for any QMB with a Big Bore Kit or Stroker Big Bore Kit.


Please Note: The starter cable connection is slightly different from stock QMB139 starters. You will either need to drill out the hole on the spade connector or modify your starter wire by adding a spade connector.


**MADE IN TAIWAN**


**NOTE: Electrical, High Performance, Aftermarket items are non-returnable so please check photos and specifications before ordering.


Please see our Warranty and Returns Policy