Variator Kit, Dr. Pulley for 125cc - 150cc GY6 Scooters, ATVs, Go Karts

Dr. Pulley Variator Kit for 125cc - 150cc GY6 Scooters, ATVs, and Go Karts


SPECIFICATIONS:

• Includes Sliders
• Does Not Included Roller Weights
• Number of Splines: 19
• Drive Face Outer Diameter (A): 114mm
• Boss Inner Diameter (C): 15mm
• Boss Outer Diameter (B): 24mm
• Ramp Plate Inner Diameter (D): 15mm
• Fan Inner Diameter Peak to Peak (H): 14mm
• Fan Inner Diameter Valley to Valley (G): 15mm

COMPATIBILITY:

• Amigo - 150cc Scooters, ATVs
• Apollo - 150cc Scooters, ATVs, Go Karts
• Baotian - 150cc Scooters
• Baron - 150cc Scooters
• Bintelli - 150cc Scooters
• BMS - 150cc Scooters, ATVs, Go Karts
• Coolster - 150cc Scooters, ATVs, Go Karts
• Diamo - 150cc Scooters, ATVs
• Flyscooter - 150cc Scooters
• Gorilla Motor Works - 150cc Scooters
• Ice Bear - 150cc Scooters, ATVs, Go Karts
• Italica - 150cc Scooters
• JCL - 150cc Scooters, ATVs, Go Karts
• Jonway - 150cc Scooters
• Kandi - 150cc Scooters, ATVs, Go Karts
• Kinroad - 150cc Scooters, ATVs, Go Karts
• KMD - 150cc Scooters, ATVs, Go Karts
• Lance - 125cc/150cc Scooters, ATVs, Go Karts
• Leike - 150cc Scooters
• Linhai - 150cc Scooters
• Longbo - 150cc Scooters
• Motobravo - 150cc Scooters, ATVs, Go Karts
• Motofino - 150cc Scooters
• Motorino - 150cc Scooters
• NST - 150cc Scooters, ATVs, Go Karts
• Peace - 150cc Scooters
• Puma Cycles - 150cc Scooters
• Redstreak - 150cc Scooters
• Roketa - 150cc Scooters, ATVs, Go Karts
• Scootstar - 150cc Scooters
• Schwinn - 150cc Scooters
• SSR - 150cc Scooters, ATVs, Go Karts
• SUNL - 150cc Scooters, ATVs, Go Karts
• Supermach - 150cc Scooters, ATVs
• Tank Sports - 150cc Scooters, ATVs
• TaoTao - 150cc Scooters, ATVs, Go Karts
• Trailmaster - 150cc Scooters
• Veloz - 150cc Scooters
• Verucci - 150cc Scooters, ATVs, Go Karts
• Vitacci - 150cc Scooters, ATVs, Go Karts
• Viva - 150cc Scooters, ATVs, Go Karts
• Wolf - 150cc Scooters
• Xingyue - 150cc Scooters
• ZNEN - 150cc Scooters
• Many Other 150cc GY6 Based Engines

This performance Dr. Pulley Variator (front clutch assembly) is specifically made for the GY6 150cc engine. Therefore, this clutch only works for the GT 250 or Standard 250 or any other 250s on the market that are Forward/Neutral/Reverse OR Forward/Reverse.


Specially coated ramp plates create less friction on the rollers or sliders, allowing them to adapt more rapidly to changing driving conditions and resulting in less wear.


The steep angle ramp plates in the Dr. Pulley variators allow for faster and smoother engagement at all speeds, and allow lighter weighted sliders to fully extend to make the most of your CVT system.


The Dr. Pulley variator comes with the variator, fan plate, and center dowel pin. Roller or slider weights not included.


**MADE IN TAIWAN**