Variator Sliding Weights, Dr. Pulley, 20mm x 15mm for Honda PCX, Genuine Blur

Dr. Pulley Sliding Weights for Honda PCX and Genuine Blur


COMPATIBILITY:

• Beta - Eikon 125/150
• BMS - Zen King (Kerrigan T-150) 150
• Flyscooter - Cadenza 150
• Genuine - Blur 220
• Honda - ADV 150, PCX 125/150
• Kymco - Bet & Win 125/150, Dink 125/150, Dink 200, Grand Dink 150
• Lance - Phoenix 150
• Malaguti - F18 Warrior 125/150
• PGO - G-Max 220
• SYM - HD200, RV200

These are 20 x 15mm weights, so they'll fit both the Honda PCX and the Genuine Blur 220i.


The Honda PCX uses 15g stock rollers. The SYM HD200/RV200 uses 16g stock rollers.


The Genuine Blur 220i and PGO G-Max 220i use 14.5g stock rollers.


We highly recommend that you begin by upgrading the variator roller weights before engaging in any performance upgrades. This is the simplest of upgrades and the least expensive. This is a minimal investment and offers a maximum return.

The main rule for tuning variators is the lighter the roller the more rpm's are needed to push the rolls outwards through centrifugal motion to set the gear change in motion. Heavier roller weights need lower rpm's to start moving.

Heavier roller weights = slower take-off speed, more acceleration = higher maximum speed.
Lighter roller weights = faster take-off speed, less acceleration = lower achievable speed.

The right balance is an individual choice since a scooter racer will want heavier weights to achieve a higher overall speed so that they might be faster at full throttle. For daily use a rider might prefer lighter weights for more power to take off faster at stop light.

Dr. Pulley Roller Weights -- The latest roller weights to hit the market and the most advanced weights available. These sliding rollers perform up to 20% better than standard round weights and last up to 18% longer with 22% less performance material loss. The weights have several unique features such as their composite material being nylon for faster performance.

Made of unique tribological material SL-9T and SL-9TS (oilless PA46) • Low friction coefficient / Low wear / High temperature resistance • Aluminum compatible; No abrasive fibers (glass fiber or carbon fiber) • Fastest Roller Weights available